Next generation heat-proof material revolutionizes aerospace technology

[Oct 25, 2022: Ken Kingery, Duke University]


The carbides could achieve improved communications and thermal regulation in technologies including satellites and hypersonic aircraft. (CREDIT: Creative Commons)



A group of scientists led by Duke University have engineered a new class of materials capable of producing tunable plasmonic properties while withstanding incredibly high temperatures.


Plasmonics is a technology that essentially traps the energy of light within groups of electrons oscillating together on a metallic surface. This creates a powerful electromagnetic field that interacts with incoming light, allowing devices to absorb, emit or otherwise control specific frequencies across much of the electromagnetic spectrum.


 
 

The new materials are hard enough to stir molten steel and can withstand temperatures above 7,000 degrees Fahrenheit – about the same temperatures found just a few hundred miles above the surface of the sun. Coupled with their newly discovered plasmonic abilities, the carbides could achieve improved communications and thermal regulation in technologies including satellites and hypersonic aircraft.


The research appears online in the open access journal Nature Communications.


 

Related Stories:

 

“The standard metals used in plasmonics research, such as gold, silver and copper, melt at relatively low temperatures and need protection from the elements,” said Arrigo Calzolari, a researcher at the Istituto Nanoscienze of Consiglio Nazionale delle Ricerche in Modena, Italy “That means they can’t be used in rockets, satellites or other aerospace applications. But these new materials we are developing open a completely new working arena because they can create plasmonic effects at incredibly high temperatures.”


The abilities come from a class of disordered ceramics discovered in 2018 by Stefano Curtarolo, professor of mechanical engineering and materials science at Duke, called “high-entropy” carbides.


 
 

Jettisoning the reliance on the crystalline structures and bonds that keep traditional materials together, these high-entropy carbides rely on a combination of many disorderly elements of various sizes to enhance stability. While a pile of baseballs won’t stand on its own, a pile of baseballs, shoes, bats, hats and gloves just might support a resting baseball player.


The interlocking fingers of high-entropy carbides and borides push and pull on each other to produce a material that is harder than either material alone. (CREDIT: Duke University)


The original group of high-entropy materials were made of carbon and five different metallic elements, technically making them a class of carbides. Since then, Curtarolo has secured a $7.5 million grant through the US Department of Defense’s Multidisciplinary University Research Initiative (MURI) competition to develop a suite of AI-materials tools capable of designing similar materials with tailored properties on demand.


 
 

Stefano Curtarolo

Calzolari knew about these materials and the project Curtarolo was leading. He also knew that tantalum carbide (a parent yet simpler system) is extremely durable and exhibits plasmonic abilities in the visible spectrum. But the material can’t be tuned to different frequencies of light outside of its natural range, limiting its usefulness in real-world applications.


Putting two and two together, Calzolari and Curtarolo joined forces on a hunch that certain recipes for high-entropy carbides – especially those containing tantalum – could demonstrate tunable plasmonic properties across a wide spectrum.


“After running the recipe ideas through the disorder models and calculations we’ve been developing, we discovered that they do have plasmonic properties, and that we can tune them by tweaking the recipes.” said Stefano Curtarolo.


Less than six months later, they were proven right.


 
 

“Arrigo came to me to make sure these carbide mixtures would work and that they would have plasmonic properties,” Curtarolo said. “After running the recipe ideas through the disorder models and calculations we’ve been developing, we discovered that they do have plasmonic properties, and that we can tune them by tweaking the recipes.”


In the paper, the researchers’ models show that 14 different high-entropy recipes demonstrate plasmonic properties across the near-infrared and visible spectrum of light, making them good candidates for optical and telecommunication applications.


They also worked with Douglas Wolfe, professor of materials science and engineering and the metals, ceramics, coating processing department head for the applied research laboratory at Penn State, to prove their theory experimentally.


As a member of the MURI project led by Curtarolo, Wolfe was already familiar with high-entropy carbides. He happened to have a sample of one of the recipes in question, which helped the group to quickly demonstrate the plasmonic properties of HfTa4C5 and showed that they matched well with their computational models.


The paper lays out different compositions that work better or worse than each other in various frequency ranges. The researchers plan to continue to create new recipes and test them for potential use in a wide range of applications, such as antennas, light and heat manipulation, and many more on any device that is subjected to ultra-high temperatures.


 
 

“These materials bring together plasmonics, hardness, stability and high temperatures into a single material,” Curtarolo said. “And they can be tailored to specific applications, which isn’t possible using standard materials because you can’t change properties defined by nature.”





For more science news stories check out our New Innovations section at The Brighter Side of News.


 

Note: Materials provided above by Duke University. Content may be edited for style and length.


 
 

Like these kind of feel good stories? Get the Brighter Side of News' newsletter.


 

Most Recent Stories